|
Sunhill 4-Side 5-Spindle Moulder
Model SMC-515
- The feeding table and fence have been surfaced with hardened chrome to minimize friction and extend service life.
- Set-up time is greatly reduced through the use of digital counters on each spindle. Two counters per spindle provide both vertical and horizontal position.
- A two-stage pneumatic system allows the operator to independently control the air pressure to the front and back drive rollers as needed.
- Both top and bottom drive rollers are synchronized and power is transmitted through a Cardan Drive (gearbox/ chainless) system, which provides for a superior finished product.
- Solid cast iron frame construction allows for permanent stability and overall machine integrity.
- 5’ In-feed Table
- Centralized lubrication system.
- Convenient hand pump for table lubrication.
- Sound and safety enclosure.
- Complies with ISO9001 standard.
| SPECIFICATIONS |
|
MODEL SMC-515 |
Number of Spindles |
|
5 |
Working Width |
|
1/2" - 6" |
Working Thickness |
|
5/16" - 4" |
Minimum Length |
|
8" |
Motors
1st Bottom
2nd Right100
3rd Left
4th Top
5th Bottom |
Cutting Circle
125-160mm
120-160mm
120-160mm
125-160mm
120-160mm |
Motor
5.5HP,
5.5HP
5.5HP
7.5HP
5.5HP |
| Elevating Motor |
|
1HP |
| Feed Motor |
|
4HP |
| Spindle Diameter |
|
40mm |
| Spindle rpm |
|
6,000 rpm |
| Feed Rate |
|
18-60 FPM |
| Machine Dimensions |
|
116" x 56 " x 64" |
| Gross Weight |
|
6,800 lbs. |
|
|
